Yes. In order to use the SmartPlug Replacement RV Power Inlet - 50 Amp # SM56FR you will need to replace your old twist lock power cord with a SmartPlug RV Power Cord - 125/250V - 50 Amp - 30' # SM86FR. view full answer...
To upgrade from 30 amp to 50 amp on your 2018 Leprechaun you will need a new power inlet and power center. For your inlet I recommend the Furrion 50 Amp RV Power Inlet # F52INSBS. Then for a power center you can use the Progressive Dynamics # PD4560K18LS8. You will also need 6 gauge wire for installation.
If you need a 50 amp power cord you can use the Mighty Cord # A10-5036EDBK. You might also want the Mighty Cord RV Power Cord Adapter - 50 Amp Female to 30 Amp Male # A10-3050FBK if... view full answer...
Thank you for the photo as it was very helpful and we do have exactly what you need to connect the 50 amp inlet on your trailer to the 110 volt on your house.
Since there isn't a single adapter you will need two different parts, though using them is very easy. You will start with the Mighty Cord 90-Degree Detachable RV Power Cord # A10-5025ED90, which you will simply plug into your trailer's inlet. Then you will use the Mighty Cord Dog Bone RV Power Cord Adapter # A10-1550, which will... view full answer...
You can connect your generator's 20-amp female outlet to your RV's 30-amp power inlet by using Furrion RV Power Cord Adapter Plug # F3120ADRY along with an extension cord such as 15-foot # A10-3015EH or 10-foot # A10-3010EH. view full answer...
Yes! To get another 30A socket to match what comes with the SmartPlug RV Power Cord and Stainless Steel Inlet # SM39FR you just need the part # SM24FR.
Attached is an installation video for you to check out! view full answer...
Mighty Cord has a 25' twist lock power cord extension, Mighty Cord RV Power Cord - 30 Amps - 25' Long
Item # A10-3025ED90, that will work with your Epicord 30 Amp Twist Lock Power Inlet - White Item # 277-000137. view full answer...
You can upgrade your setup from a 30 amp to a 50 amp but it's going to be pricey and you're likely going to need to hire an electrician.
The first thing you're going to need is to swap out your 30 amp inlet with the SmartPlug RV and Marine Power Inlet # SM79FR. This is going to require you to replace the existing wiring as well to accommodate for the extra amps.
You'll also need a new control center, Progressive Dynamics 4500 Series RV Converter w/ Charge Wizard and AC/DC Distribution... view full answer...
So it sounds like you just need a replacement female 30 amp twist lock connector that you can use with the Epicord 30 Amp Twist Lock Power Inlet - White # 277-000137.
We do have what you are looking for, which is the Mighty Cord Replacement Twist Lock Connector for RVs - Female - 30 Amps # A10-30FDT.
I do recommend adding the cover for the connector in order to protect it, which is the Weatherproof Cover with Threaded Ring for Mighty Cord Twist Lock Female Connector - 30 Amps # A10-30CV. view full answer...
Motorhome 50-amp male power inlets require a cord with a 50 Amp Twist Lock female plug like the one on the Mighty Cord 25-foot # A10-3050EDBK. But since the other end of this cord has a 30-amp male connector, not a 15-amp household supply male connector, you will also need a dogbone adapter # A10-1530HVP to give you the standard 120V male plug to connect to a household outlet. view full answer...
For your trailer with the Solar Port Inlet for Furrion Solar Panel Battery Charger # FSPINS-BS you can use the Goal Zero Boulder 100 Briefcase Solar Panel # 287-32408, or you can use the Go Power Portable Solar Panel with Digital Solar Controller # 34282730; you'll just need to be sure to not exceed the 10 amp rating for the solar port. view full answer...
You are correct in that in order to power AC and DC units with shore power, you need a converter. The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 45 Amp, part # PD4045KA, that you looked at is a good choice for this. I've linked to a video review of this converter and included a picture of a typical setup.
Keep in mind that you will need a power inlet to get the shore power. If you don't already have one, you can use the Epicord 30 Amp Twist Lock Power Inlet... view full answer...
There is an adapter you can use to go to 30 amp and 15 amp from the SmartPlug RV Power Inlet - 50 Amp # SM29FR.
What you would need is the SmartPlug Marine Power Cord Adapter - 50 Amp Female to 30 Amp Male Twist Lock Connector # SM43VR.
Or the SmartPlug RV Power Cord Adapter - 50 Amp Female to 15 Amp Male # SM93VR. view full answer...
Thanks so much for sending me a photo. Unfortunately, the best route forward is to uninstall the female outlet installed on your trailer and install it with a male outlet like the Mighty Cord Replacement RV Power Inlet - Twist Lock - 30 Amp # A10-30INVP.
After the male outlet is installed, you can now use a power cord like the Mighty Cord RV Power Cord - 30 Amps - 25' Long # A10-3025EDBK. It is important to note that this power cord will only work with a 30-amp shore power connection.... view full answer...
For the 30AMP Furrion Marine Power Inlet # F30ITSBS 10 gauge wire is recommended for running to your distribution panel/power converter. view full answer...
Since you are only looking to use a very low amount of power I recommend using residential components.
To get power into your 2016 3 horse trailer tack room I recommend using a Mighty Cord RV Power Inlet # A10-30INVP. To that you can use the Mighty Cord RV Power Cord Adapter # A10-1530D90VP to drop down to a 15 amp cord so that you do not need to all the power required for a large 30 amp cord. This will make it easier to use a Mighty Cord Indoor/Outdoor Extension Cord # A10-10014E for... view full answer...
To add power to your converted camper you will need a power inlet and a power converter with an AC/DC panel.
For these you can use the Epicord 30 Amp Twist Lock Power Inlet # 277-000137 along with the Progressive Dynamics 4000 Series Inteli-Power Converter w/ Charge Wizard and AC/DC Panel # PD4045KA.
You will need to add Romex wire from a local hardware store and run it from the inlet to the panel and the accessories you plan to put in your camper. I have added the instructions of the... view full answer...
Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project.
For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp Twist Lock Power Inlet # 277-000138 you previously looked at.
The Mighty Cord RV Power Cord # A10-3025ED90 is what you can use to connect your trailer to the shore power provided by the campground. This is a cord is 25 foot long which is long... view full answer...
You will need a plug on the outside of your 2021 Ram ProMaster 2500 and the wiring for this plug. In addition, you will need a converter to convert the power from 110V to 12V. I recommend the Furrion Replacement RV Power Inlet - 30 Amp Twist Lock - Stainless Steel, part # F30ITSSS. The twist lock keeps this cord weatherproof.
You will also need a transfer switch and a converter. You can get both with the Go Power Industrial Pure Sine Wave Inverter Charger - 2,000 Watts - 100 Amps - 12V,... view full answer...
The grey (GS) has been marked no longer available, unfortunately, but the black (BS) is available and is the exact same thing as the grey version.
If you're interested, the Furrion Marine Power Inlet - 30Amp - 125V - LED - Square # F30ITSBS is what you'll want.
This has the same 30A 125V ratings as the grey version, as well as the same dimensions of 4-7/16" tall x 3-1/2" wide x 3-7/8" deep. view full answer...
The Valterra City Water Inlet # A01-2001VP is a universal fit so it will work on your RV as long as the measurements for install are the same. The Valterra is 7-1/2 by 5-1/4 inches.
All of the hardware and tape for installation is included. view full answer...
Go To Results